Giảm giá!

Switch chia mạng Cisco 26Port PoE – Cisco SG200-26P

Giá gốc là: 11,370,000₫.Giá hiện tại là: 9,850,000₫.

Tiết kiệm 1,520,000 Giảm 13% so với giá niêm yết

Switch chia mạng Cisco 26Port PoE – Cisco SG200-26P là thiết bị mang hiệu suất cao để chạy các ứng dụng viễn thông, bao gồm cả các dịch vụ video băng thông, nâng cao công suất và hiệu suất truyền tải, cho phép bạn chuyển các tập tin lớn chỉ trong vài giây. Sản phẩm switch ứng dụng công nghệ cao Fast store-and-forward switching xác định các gói tin bị hư hỏng và ngăn ngừa chúng khỏi bị truyền qua mạng, tất cả những tính năng chạy tự động, không có quản lý hoặc cấu hình yêu cầu.

Mã sản phẩm
SG200-26P
Thương hiệu

Switch chia mạng Cisco 26Port PoE – Cisco SG200-26P 10/100/1000Mbps

Switch chia mạng Cisco 26Port PoE – Cisco SG200-26P là thiết bị mang hiệu suất cao để chạy các ứng dụng viễn thông, bao gồm cả các dịch vụ video băng thông, nâng cao công suất và hiệu suất truyền tải, cho phép bạn chuyển các tập tin lớn chỉ trong vài giây. Sản phẩm switch Cisco ứng dụng công nghệ cao Fast store-and-forward switching xác định các gói tin bị hư hỏng và ngăn ngừa chúng khỏi bị truyền qua mạng, tất cả những tính năng chạy tự động, không có quản lý hoặc cấu hình yêu cầu.

Switch chia mạng PoE Cisco SG200-26P

Tính năng Switch chia mạng Cisco 26Port PoE – Cisco SG200-26P 10/100/1000Mbps

  • Part number: SLM2024PT-EU
  • Address Learning and Aging, and Data Flow Control giúp tối ưu truyền dữ liệu
  • Nguồn điện: 110-240VAC, 50-60 Hz, internal
  • 24 cổng 10/100/1000Mbps tự động chuyển chế độ cáp thẳng hoặc chéo (MDI/MDI-X) + 2 combo mini-GBIC ports
  • Hoạt động ở 2 chế độ half- or full-duplex cho mỗi cổng
  • Thiết kế để bàn hoặc lắp trên tủ Rack

Switch chia mạng PoE Cisco SG200-26P

Thông số kỹ thuật của Bộ chia mạng Cisco SG200-26

Thông số kỹ thuật của Bộ chia mạng Cisco SG200-26
PerformanceCapacity in Mpps (64-byte packets): 38.69
Switching Capacity in Gbps: 52.0
Layer 2 SwitchingSpanning Tree Protocol: Standard 802.1d STP support
Fast convergence using 802.1w (Rapid Spanning Tree), enabled by default
Port Grouping: Support for IEEE 802.3ad Link Aggregation Control Protocol
– Up to 8 groups
– Up to 4 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN: Support for up to 128 VLANs simultaneously (out of 4096 VLAN IDs)
Port-based and 802.1Q tag-based VLANs
Voice VLAN: Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
Internet Group Management Protocol Versions 1 and 2 Snooping: Internet Group Management Protocol limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
Head-of-Line (HOL) Blocking: Head-of-line blocking
SecurityIEEE 802.1X (Authenticator Role): RADIUS authentication and accounting, MD5 hashPort Security: Locks MAC addresses to ports and limits the number of learned MAC addresses

Storm Control: Broadcast, multicast and unknown unicast

Quality of ServicePriority Levels: 4 hardware queues
Scheduling: Strict priority and weighted round-robin
Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
Class of Service: Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)
Rate Limiting: Ingress policer, per VLAN and per port
StandardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 2618
IPv6IPv6: IPv6 host mode
IPv6 over Ethernet
Dual IPv6/IPv4 stack
IPv6 neighbor and router discovery (ND)
IPv6 stateless address auto-configuration
Path maximum transmission unit discovery
Duplicate address detection
Internet Control Message Protocol version 6
IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol support
IPv6 QoS: Prioritize IPv6 packets in hardware
Multicast Listener Discovery Snooping: Deliver IPv6 multicast packets only to the required receivers
IPv6 Applications: Web, ping, Simple Network Time Protocol, Trivial File Transfer Protocol, RADIUS, syslog, DNS client
IPv6 RFCs Supported: RFC 2463: ICMP version 6
RFC 3513: IPv6 address architecture
RFC 4291: IPv6 addressing architecture
RFC 2460: IPv6 specification
RFC 2461: Neighbor discovery for IPv6
RFC 2462: IPv6 stateless address auto-configuration
RFC 1981: Path maximum transmission unit discovery
RFC 4007: IPv6 scoped address architecture
RFC 3484: Default address selection mechanism
RFC 4214: ISATAP tunneling
RFC 4293: MIB IPv6: Textual conventions and general group
RFC 3595: Textual conventions for IPv6 flow label
ManagementWeb User Interface: Built-in switch configuration utility for easy browser-based device configuration (HTTP) Supports configuration, system dashboard, system maintenance and monitoring
Remote Monitoring: Embedded RMON software agent supports one RMON group (statistics) for enhanced traffic management, monitoring and analysis
IPv4 and IPv6 Dual Stack: Coexistence of both protocol stacks to ease migration
Firmware Upgrade: Web browser upgrade (HTTP) and TFTP
Port Mirroring: Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe Up to 4 source ports can be mirrored to one destination port. A single session is supported
VLAN Mirroring: Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe Up to 4 source VLANs can be mirrored to one destination port. A single session is supported
Dynamic Host Configuration Protocol (Options 66 and 67): Dynamic Host Configuration Protocol options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download)
Text-Editable Config Files: Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
Smartports: Simplified configuration of QoS and security capabilities
Cloud Services: Support for FindIT Network Discovery Utility
Localization: Localization of GUI and documentation into multiple languages
Other Management: HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog
Power EfficiencyEnergy Detect: Automatically turns off power on Gigabit Ethernet RJ-45 port when the switch detects a link down
Active mode is resumed without loss of any packets when the switch detects the link is back up
Cable Length Detection: Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter than 10 m
General FeaturesJumbo Frames: Frame sizes up to 10 KB supported on Gigabit interfaces
MAC Table: Up to 8000 MAC addresses
DiscoveryLink Layer Discovery Protocol (802.1ab) with LLDP-MED Extensions: Link Layer Discovery Protocol allows the switch to advertise its identification, configuration and capabilities to neighboring devices, which store the data in an MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones
Cisco Discovery Protocol: The switch advertises itself using the Cisco Discovery Protocol
Power Over EthernetPower Dedicated to PoE: 100W
Number of Ports That Support PoE: 12
Power ConsumptionPower Savings Mode: Short reach plus Energy Detect
Power Consumption Worst Case: 110V/0.591A/36.8W
220V/0.381A/37.5W
Heat Dissipation (BTU/hr): 128.0
PortsTotal system ports: 26 Gigabit Ethernet
24 Gigabit Ethernet RJ-45 ports
2 Gigabit Ethernet combo mini-GBIC ports  (RJ-45 + SFP) 1
ButtonsReset button
Cabling TypeUnshielded twisted pair Category 5 or better for 10BASE-T/100BASE-TX; Unshielded twisted pair Category 5 Ethernet or better for 1000BASE-T
LEDsSystem, Link/Act, PoE, Speed
Flash16 MB
CPU128 MB memory
Packet Buffer Memory4 MB
Power Supply100V-240V, 12V/2.5A, 50-60 HZ
100V-240V, 50V/2A, 50-60 HZ
Fan1
Acoustic Noise40.2 dB
MTBF@ 40°C (hours): 218,842
CertificationsUL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
MINIMUM REQUIREMENTSWeb Browser: Mozilla Firefox version 2.5 or later; Microsoft Internet Explorer version 6 or later
Category 5 Ethernet network cable
TCP/IP, network adapter and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network
Dimensions (DxWxH)10.1 x 17.35 x 1.73″ (257 x 440 x 44 mm)
Weight8.42 lb (3.82 kg)

Switch chia mạng PoE Cisco SG200-26P

Viễn Thông Xanh là đơn vị cung cấp và phân phối các thiết bị Switch chia mạng chính hãng với giá rẻ nhất thị trường hiện nay. Với nhiều năm kinh nghiệm trong lĩnh vực viễn thông chúng tôi xin cam kết toàn bộ sản phẩm VTX đưa ra thị trường đều là hàng chính hãng đảm bảo uy tín và chất lượng. Bạn hoàn toàn yên tâm khi mua hàng tại VTXVN.

Quý khách có nhu cầu mua hàng hoặc nhận báo giá Switch chia mạng Cisco 26Port PoE – Cisco SG200-26P vui lòng liên hệ với chúng tôi để nhận được thông tin chi tiết về sản phẩm.

Thông số kỹ thuật

Thông số kỹ thuật của sản phẩm đang được cập nhật. Vui lòng liên hệ để nhận tài liệu chi tiết.

Đánh giá

Chưa có đánh giá nào.

Chia sẻ trải nghiệm của bạn

Đánh giá thực tế của bạn giúp khách hàng khác lựa chọn chính xác hơn.

Tối đa 4 tệp: ảnh JPG, PNG, WEBP tối đa 5MB hoặc một video MP4, WEBM tối đa 20MB.

Nội dung và tệp đính kèm sẽ được kiểm duyệt trước khi hiển thị.